Sure Bond SB-190 Adhesive Sealant

Returns of unsed items in new condition and free from defects are accepted within Sixty(60) days of purchase for store credit. Customers are responsible for all shipping costs. Returns will not be accepted on custom painted snow guards.

If you are uncertain, we encourage you to request a snow guards sample before purchasing, which we will send to you at our own expense. This way you can be sure you have choosen the appropriate snowguard in regards to color, style and fit before you complete a purchase.

For more information please call 860-255-1614.

1. Minimum application temperature is 50°F. Keep above 50°F before use.
2. Surfaces must be clean, dry and free dust, dirt, oil and water-proofing and release agents.
3. Cut cartridge nozzle at a slant at the desired bead size mark and puncture inner seal. Insert into standard caulk gun.
4. Apply uniform bead with steady pressure
5. Tool immediately after application to ensure full contact with both sides of the joint area.
6. SB-190 Everseal starts to skin over in 20-25 minutes. Full cure time is 7 to 28 days with a 1/8″ bead, depensing conditions.

Clean: Clean up with naphtha or mineral spirits

Storage: Store locked up in cool, dry well ventilated area.

User determines suitability for intended use and assumes all risk and liability. All purchases and use are subject to warranty found at www.surebond.com/warranty

TECHNICAL DATA SHEET

https://www.surebond.com/tech_data_sheets/SB-190TDS.pdf

SAFETY DATA SHEET

https://www.surebond.com/SDS/SB-190SDS.pdf